There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

The GE VMIVME-7750 is an Intel Pentium III processor-based VME single-board computer designed for industrial control and embedded applications. The GE VMIVME-7750 integrates CPU, memory, graphics, Ethernet, serial ports, and expansion in a single 6U VME slot to serve as the core processing module in a VME system. With a system bus up to 133 MHz and support for PC133 SDRAM, the GE VMIVME-7750 delivers sufficient performance for real-time monitoring, motion control, and data acquisition tasks. The GE VMIVME-7750 supports multiple operating systems, including Windows and various real-time OS options, making it suitable for long-life industrial platforms.

Model GE VMIVME-7750 VME SBC

Processor Up to 1.26 GHz Intel Pentium III with 512 KB advanced transfer cache

System bus 133 MHz system bus (Intel 815E chipset)

Memory Up to 512 MB PC133 SDRAM using one 144-pin SODIMM

Graphics Internal AGP SVGA controller with 4 MB display cache, resolutions up to 1600×1200×256 colors

Storage CompactFlash support (up to about 512 MB–1 GB, bootable depending on configuration)

Ethernet Dual Ethernet controllers, 10BaseT/100BaseTX

Serial ports Two 16550-compatible serial ports, up to 115 kbit/s

Expansion One PMC expansion site, 32-bit PCI, 33 MHz

Form factor 6U VME single-slot board

Power (typical) +5 V about 6 A (typ.), +12 V and −12 V small currents (for serial, etc.)

Operating temp. 0 to 50 °C standard, some CPU options with extended range

Install the GE VMIVME-7750 in the designated VME slot, then apply system power according to the chassis manual.

Confirm that the GE VMIVME-7750 completes its power-on self-test and that front-panel indicators and video output (if used) show normal status.

Enter the BIOS setup of the GE VMIVME-7750 to configure boot order, serial ports, and network boot options if required.

Boot the selected operating system (Windows, Linux, or a real-time OS) from CompactFlash, hard disk, or remote Ethernet boot supported by the GE VMIVME-7750.

Start application software for control or data acquisition and monitor CPU load, memory usage, and network performance of the GE VMIVME-7750.

Always remove system power and discharge static before inserting or removing the GE VMIVME-7750 from the VME backplane.

Slide the GE VMIVME-7750 along the card guides and fully seat the board into the VME connector using the ejector levers; do not use excessive force.

Ensure the VME slot address, backplane configuration, and power capacity are compatible with the GE VMIVME-7750 and attached PMC modules.

Provide adequate airflow in the chassis; high-power CPU options of the GE VMIVME-7750 may require strong front-to-back cooling.

Use proper SODIMM and CompactFlash types recommended for the GE VMIVME-7750 to avoid compatibility issues.

Periodically inspect the GE VMIVME-7750 for dust and gently clean the board and heat sink using dry, oil-free compressed air.

Check that front-panel connectors, serial adapters, and PMC modules on the GE VMIVME-7750 remain firmly seated and free of corrosion.

Review system logs and application diagnostics to detect memory, Ethernet, or storage anomalies related to the GE VMIVME-7750 in early stages.

Keep a backup image of the OS and applications used on the GE VMIVME-7750 CompactFlash or network server for quick restoration.

For long-life systems, plan periodic functional tests or board-level spares so a GE VMIVME-7750 can be replaced quickly if hardware degradation is detected.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.