There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

The GE VMIACC-5595-208 is a managed reflective memory hub designed for use with GE Fanuc reflective memory real-time network products. It provides up to eight fiber-optic ports using SFP transceivers, enabling high-speed, low-latency data transfer in industrial control and automation systems. The GE VMIACC-5595-208 can automatically bypass ports on loss of signal or synchronization so that the remaining network nodes continue operating. It supports both multimode and single-mode fiber for short- and long-distance networking and can be used in cascaded configurations to build large networks. The GE VMIACC-5595-208 is typically supplied as a 19-inch 1U rack-mount or desktop module with a universal AC power input.

Model GE VMIACC-5595-208 reflective memory hub

Function type Managed reflective memory hub assembly

Compatible products GE VMIxxx-5565 / 5565-series reflective memory modules

Number of ports Up to 8 SFP fiber-optic ports

Data rate 2 Gb/s reflective memory network speed

Fiber types Multimode (short-range) and single-mode (long-range) SFP transceivers

Multimode wavelength Approximately 830–860 nm

Multimode max distance Up to about 300 m (typical)

Single-mode (10 km) λ Approximately 1300–1335 nm (typical)

Single-mode (10 km) dist Up to about 10 km (typical)

Single-mode (80 km) λ Approximately 1540–1570 nm (typical)

Single-mode (80 km) dist Up to about 80 km (typical)

Management interfaces RS-232 serial port, Ethernet (remote monitoring via web browser)

Mounting options 19-inch 1U rack-mount or desktop enclosure

Typical dimensions Approx. 1U high, 19-inch wide; depth around 250–300 mm (varies by version)

Power requirements Universal AC 90–264 V, 47–440 Hz, about 25 W

Safety / EMC Designed to meet UL / CE and related EMC standards (e.g. EN55022, EN61000-4 series)

Install the GE VMIACC-5595-208 in the rack or on a stable desktop and connect the AC power cord.

Insert the appropriate SFP transceivers (multimode or single-mode) into each port of the GE VMIACC-5595-208 as required by the network design.

Connect fiber-optic cables from the GE VMIACC-5595-208 ports to the corresponding reflective memory nodes.

Power on the hub and connected nodes, then verify port status LEDs for link, signal, and synchronization.

Use the RS-232 or Ethernet interface (web browser) to view status, configure port modes, and set any bypass or “dark-to-dark” options as needed.

Ensure power is disconnected before wiring or inserting/removing SFP transceivers in the GE VMIACC-5595-208.

Use only compatible SFP modules and fiber types; avoid excessive bending or stress on fiber-optic cables.

Mount the GE VMIACC-5595-208 in a well-ventilated area, leaving space around the air inlets and outlets.

Follow ESD protection procedures when handling the GE VMIACC-5595-208 or SFP modules.

Label all ports and fibers clearly to simplify troubleshooting and future maintenance.

Periodically inspect the GE VMIACC-5595-208 front panel to check LED indications for abnormal ports or alarms.

Keep vents and the enclosure of the GE VMIACC-5595-208 free from dust; clean gently with dry air or a soft brush.

Check fiber connectors for contamination and clean them using proper fiber-optic cleaning tools if link quality degrades.

Back up configuration data and document network topology including all GE VMIACC-5595-208 settings.

If used in harsh environments, schedule regular checks of power connections and verify that the GE VMIACC-5595-208 operates within specified temperature and humidity limits.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.