There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

The GE EVMECNTM13 is a high-precision VME counter / timing / or embedded control module, typically used for real-time event counting, data acquisition, and synchronization tasks in VMEbus or industrial control systems. The GE EVMECNTM13 integrates ADC, DAC, digital I/O, counters, and timing functions into one compact VME card, making it suitable for test benches, drive control, and process-monitoring applications.

The GE EVMECNTM13 supports multiple I/O channels (for example up to 8× synchronous 400 kHz ADC inputs and 2× 400 kHz DAC outputs in some configurations) and additional digital I/O with counters and timers, enabling deterministic control loops. The GE EVMECNTM13 is designed for rugged environments and can be integrated into larger GE-based automation or excitation control solutions.

Overall, the GE EVMECNTM13 is a specialized GE module where the GE EVMECNTM13 name reflects its role as a VME-series embedded or timing board rather than a standard PLC I/O card.

Model GE EVMECNTM13

Board type VME counter / timing / embedded control module

Bus interface VMEbus (6U single-slot)

Power supply Typically 24 VDC (or VME-slot power depending on configuration)

Analog inputs Up to 8× synchronous 400 kHz ADC inputs (in data-acquisition role)

Analog outputs Up to 2× 400 kHz DAC outputs (in data-acquisition role)

Digital I/O Multiple digital I/O channels with counters/timers (up to 16 DIO points in some variants)

Timing / synchronization IRIG-B, PPS, IEEE 1588-style timing or high-resolution counter capability

Operating temperature Industrial range (often –20 to +60 °C or similar, depending on exact variant)

Typical use case Real-time counting, event logging, drive control, excitation control, and bus-based timing systems

Install the GE EVMECNTM13 into the VME rack or compatible chassis and secure the board with the locking levers.

Power up the VME system and verify that the GE EVMECNTM13 is recognized by the host CPU or crate-controller.

Use the appropriate GE configuration / driver software (or vendor tools) to set channel parameters, sampling rates, and counter/timer modes.

Configure interrupts, triggers, and synchronization (IRIG-B, PPS, or network timing) if the GE EVMECNTM13 is used as a timing module.

Test I/O functions (e.g., analog input, counter, digital outputs) and validate timing accuracy before integrating into the main control loop.

Always follow the VME rack grounding and slot-spacing rules; the GE EVMECNTM13 must be installed in a compatible VMEbus slot with proper mechanical retention.

Ensure ambient temperature and airflow fall within the specified range; avoid blocking cooling vents if the GE EVMECNTM13 is used in a sealed cabinet.

Pay attention to EMI and shielding; routing for high-speed or analog signals should minimize crosstalk to the GE EVMECNTM13’s I/O channels.

Double-check wiring polarity and insulation for external sensors/actuators connected to the GE EVMECNTM13 to avoid damaging the module.

Regularly inspect the GE EVMECNTM13 for overheating, odd fan behavior, or loose connectors in the VME backplane.

Monitor system logs and driver status to detect any communication faults or counter/timing errors involving the GE EVMECNTM13.

Clean the VME rack dust filters and keep the environment within the rated temperature and humidity range to extend the life of the GE EVMECNTM13.

Periodically verify that the GE EVMECNTM13 firmware and drivers are up-to-date, especially if the system is upgraded or repurposed.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.