There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

The GE DS200DCFBG1BLC is a DC Feedback Power Supply Board (also known as DC Power Supply Feedback Board) from the GE Mark V Speedtronic turbine control system series. Designed primarily for GE drives and exciters including EX2000, DC2000, AC2000, CB2000, FC2000, ME2000, and GF2000, the GE DS200DCFBG1BLC provides essential control-level DC power to the drive/exciter while also supplying 115 VAC power (typically for enclosure cooling fans). It accepts AC input (typically 38–115 VAC) and generates regulated DC outputs such as +24 VDC (up to 3 A) and –24 VDC (up to 1 A), from which ±15 VDC is derived for control circuits. The GE DS200DCFBG1BLC includes AC/DC monitoring circuits, motor field power circuitry, driver circuits, and extensive configuration options via 12 jumpers and 7 DIP switches. Diagnostic feedback is provided through onboard LEDs and a neon indicator. The GE DS200DCFBG1BLC is a critical component in Mark V-based gas and steam turbine control systems, ensuring stable power distribution and reliable operation in demanding power generation environments. Although a legacy board, the GE DS200DCFBG1BLC remains widely supported for maintenance and upgrades in existing Mark V installations.

Model,GE DS200DCFBG1BLC

Manufacturer,General Electric (GE Vernova)

Series,Mark V Speedtronic / DS200 Series

Product Type,DC Feedback Power Supply Board

Primary Function,Provides control-level DC power to drives/exciters and 115 VAC for enclosure fans

AC Input Range,38–115 VAC (frequency up to 500 Hz depending on voltage)

DC Outputs,"+24 VDC (up to 3 A), –24 VDC (up to 1 A); derived ±15 VDC"

Configuration,12 jumpers + 7 DIP switches

Monitoring,AC and DC monitoring circuits

Indicators,2 LEDs + 1 neon indicator for status/diagnostics

Connectors,Multiple plug connectors for input/output signals

Applications,"EX2000, DC2000, AC2000, CB2000, FC2000, ME2000, GF2000 drives/exciters; Mark V turbine control"

Additional Features,"Motor field power circuit, driver circuit, robust industrial design"

Install the GE DS200DCFBG1BLC into the designated slot in the Mark V drive/exciter rack or panel, ensuring proper alignment with backplane connectors.

Connect AC input power (38–115 VAC) and field wiring to the appropriate terminals or plugs.

Set the 12 jumpers and 7 DIP switches according to the specific drive/exciter configuration and application requirements.

Power up the system and verify status indicators (LEDs and neon) show healthy operation.

Monitor DC output voltages (+24 VDC, –24 VDC, ±15 VDC) and AC/DC feedback signals via the Mark V diagnostics or HMI.

Confirm proper power delivery to the drive control circuits and enclosure cooling fans.

Integrate into the overall turbine control sequence and validate performance during startup or load changes.

Completely de-energize the Mark V drive/exciter system and follow lockout/tagout procedures before handling or installing the GE DS200DCFBG1BLC to prevent electrical hazards.

Use proper ESD protection (wrist strap and grounded mat) when installing the board to protect sensitive power circuitry.

Verify AC input voltage is within the supported range (38–115 VAC) and use appropriately rated wiring and fusing.

Carefully align all connectors and ensure secure seating to avoid intermittent power issues.

Set jumpers and DIP switches exactly per the system documentation before applying power.

Inspect the board for physical damage or component issues prior to installation.

After installation, measure output voltages under no-load and loaded conditions and clear any fault alarms before commissioning.

Check the status LEDs and neon indicator on the GE DS200DCFBG1BLC daily for normal power supply operation and any fault indications.

Monitor Mark V system diagnostics for AC/DC voltage levels, power supply alarms, or feedback signal anomalies.

Review enclosure fan operation and cooling performance to ensure the 115 VAC output is functioning correctly.

Inspect wiring terminals and connectors weekly for tightness, corrosion, or signs of overheating.

Verify output voltages (±24 VDC and derived ±15 VDC) remain stable within specification during normal turbine operation.

Clean dust from the board and rack vents (system powered off) using low-pressure compressed air every 1–3 months depending on environment.

During scheduled outages, test full power supply functionality, re-verify jumper/DIP switch settings, and perform load tests to confirm continued reliability.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.