There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

This module supports 1 to 16 temperature inputs and can be configured as 3-wire RTD, 4-wire RTD, isolated thermocouple, or a mixed input of RTD and TC.

3500/65 can be set through 3500 Rack Configuration Software, with an alarm accuracy of 0.13% of the target value, and provides over temperature and under temperature alarm functions.

It is commonly used for monitoring the bearing temperature and process temperature of rotating equipment such as steam turbines, compressors, pumps, and generators, helping to achieve online protection and fault warning.

Manufacturer Bently Nevada

Model 3500/65

Type 16 Channel Temperature Monitor

Input signal RTD/Isolated tip thermocouple

Number of channels 1 to 16

Power consumption 3 watts nominal

Input impedance greater than 1 M Ω

Input supports 3-wire RTD, 4-wire RTD, TC mix

Working temperature -30 ° C to+65 ° C

Main module size 241.3 x 24.4 x 241.8 mm

Main module weight 0.91 kg

I/O module weight 0.45 kg

Application Machinery Protection, Temperature Monitoring

Q1: What sensors does 3500/65 support?

Supports RTD and isolated thermocouple inputs, and can also be configured in a mixed manner.

Q2: How many channels does it have?

Up to 16 temperature monitoring channels.

Q3: What scenarios are applicable?

Suitable for monitoring bearing temperature, casing temperature, and process temperature, commonly used in rotating equipment and mechanical protection systems.

Q4: How to configure?

Set up programming through 3500 Rack Configuration Software.

ABB Hong Kong recently received an order from Hong Kong Electric Company Limited to provide three Terra 51 electric vehicle DC fast charging stations for installation at the Star Ferry Pier, Stanley Plaza, and Yau Wan Village parking lot on Hong Kong Island. As one of the oldest power companies in the world, Hong Kong Electric Company Limited has long provided efficient and stable electricity to approximately 500000 residents on Hong Kong Island and Lamma Island. After installation and debugging, ABB charging stations will be able to provide charging services for electric vehicles that comply with CHAdeMO standards.

Dr. Xu Jiajun, President of ABB (Hong Kong) Limited, said, "With outstanding products, comprehensive solutions, and comprehensive supporting services, ABB has successfully demonstrated its strong strength in this new field, while also bringing confidence to customers. We firmly believe that we can achieve greater success in the future. ”

The Terra 51 charging station is an easy to install DC fast charging station with an output power of up to 50kW. As a one-stop charging solution for electric vehicles, the Terra 51 is suitable for all electric vehicles that meet the global CHAdeMO standard and is the ideal choice for achieving charging of a single vehicle within a set time. According to the different battery specifications of the vehicle, 80% of the charging can be completed within 30 minutes. Terra 51 is highly suitable for fleet operators such as taxi companies, small car companies, and public transportation departments. Due to its beautiful design and low noise during the charging process, Terra 51 products can be centrally installed in fleets or gas stations.

As a global leader in the field of fast charging equipment for electric vehicles, ABB won the largest electric vehicle charging infrastructure construction project in Europe at the beginning of this year, building a nationwide network of 200 electric vehicle fast charging devices for Estonia. Each major highway in Estonia will be equipped with a DC-AC dual-purpose fast charging station every 50 kilometers. The project will be completed by the end of 2012.

It is reported that as of April 2012, the number of electric vehicles in Hong Kong has increased from 74 in 2010 to 310. The Hong Kong government has always strongly supported and actively participated in the development of electric vehicles. At present, the Hong Kong government fleet has a total of 33 electric vehicles of different models. Another 42 electric vehicles will be assigned to different government departments in the following months. The Hong Kong government also plans to purchase at least 140 different models of electric vehicles in this fiscal year.

In May of this year, Hong Kong International Airport put forward the slogan of "jointly building the world's most environmentally friendly airport", striving to upgrade 1000 cars to electric vehicles within 5 years. At the same time, HKD 40 million will be invested to support the construction of electric vehicle charging facilities, mainly consisting of medium-sized DC chargers paired with DC fast charging piles.

With the increase in the number of electric vehicles, the planning of electric vehicle charging facilities has also received increasing attention from the Hong Kong government. 500 standard charging stations located in government parking lots were installed at the end of June this year, bringing the total number of standard charging stations in Hong Kong to 1000, distributed in 18 areas. On the basis of existing standard charging facilities, the number of fast charging stations will also be expanded from 5 to 10 within the year. The electric vehicle charging network formed as a result will not only promote the development of Hong Kong's electric vehicle industry, but also enhance public confidence in using electric vehicles.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.