There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

The ABB SAFT183VMC (also listed as SAFT 183 VMC, part number 58115479 in many references) is a legacy AC drive control board (or voltage measuring/control board) from ABB's older drive and automation product lines, often associated with Stromberg/ABB AC drives (e.g., predecessors to ACS series or similar industrial inverters). The ABB SAFT183VMC handles critical functions such as voltage measurement on the DC bus supply, control signal processing, and interface duties in variable speed drive systems. The ABB SAFT183VMC is commonly used in industrial applications for motor control in pumps, fans, conveyors, and heavy machinery. The ABB SAFT183VMC features robust design for reliable operation in harsh environments and is frequently available as new old stock (NOS), refurbished, or repairable spares. The ABB SAFT183VMC is discontinued by ABB (legacy status), but widely supported through aftermarket channels for maintenance in existing installations. Overall, the ABB SAFT183VMC is a dependable control/measurement board for classic ABB drive systems.

Model / Part Number,SAFT183VMC / SAFT183 VMC (alternative: 58115479)

Device Type,AC Drive Control Board / Voltage Measuring Card (DC bus supply monitoring and control)

Primary Application,"ABB/Stromberg AC drives, variable frequency drives (VFDs), industrial motor control"

Function,"DC bus voltage measurement, control interfacing, signal processing for drive regulation"

Power Supply (typical),System-dependent (integrated in drive; often 24 V DC auxiliary or from main DC bus)

Operating Temperature,Industrial range (typically -15 °C to +55 °C or per drive enclosure specs)

Dimensions (approx.),"Compact board (e.g., ~178 × 25 × 102 mm shipping envelope; exact varies)"

Weight (approx.),~0.15–1 kg (board level)

Mounting,Plug-in or slot-mounted in drive chassis

Status Indicators,LEDs for power/status (if equipped; check drive diagnostics)

Country of Origin,Finland / Sweden (typical ABB/Stromberg)

Life Cycle Status,Discontinued / Legacy (spares available via aftermarket; repairs common)

Power down the drive system completely, lock out/tag out, and discharge DC bus capacitors (follow drive manual safety wait time) before accessing the ABB SAFT183VMC.

Remove the old board (if replacing): disconnect cables/connectors carefully, unscrew/unclip mounting, and extract the ABB SAFT183VMC.

Install the replacement ABB SAFT183VMC into the designated slot in the drive module, ensuring proper alignment and secure fastening.

Reconnect all connectors/cables following the original wiring layout and polarity (e.g., voltage sense leads to DC bus).

Power up the drive gradually; monitor drive display/diagnostics for normal boot-up and no faults related to the ABB SAFT183VMC.

Verify DC bus voltage readings and drive operation (run test at low speed/load) to confirm functionality of the ABB SAFT183VMC.

Only qualified personnel trained in ABB drives should handle the ABB SAFT183VMC, following ABB/Stromberg safety instructions and drive-specific manuals.

Isolate mains power, lock out/tag out, wait for full capacitor discharge (high voltage hazard), and verify zero DC bus voltage before working on the ABB SAFT183VMC.

Use ESD protection (wrist strap, grounded mat) to avoid static damage to the ABB SAFT183VMC electronics.

Ensure correct connector orientation and tight connections; avoid forcing plugs or exceeding torque specs.

Confirm compatibility with the specific drive model/frame before installation of the ABB SAFT183VMC.

Do not modify the board or bypass any safety features; install in a ventilated enclosure meeting drive ratings.

Visually inspect the ABB SAFT183VMC area in the drive for dust, overheating, or loose connections during routine checks.

Monitor drive diagnostics/HMI for voltage-related alarms, undervoltage, overvoltage, or control board faults linked to the ABB SAFT183VMC.

Check drive enclosure ventilation/fans for proper airflow to prevent thermal stress on the ABB SAFT183VMC.

Listen for abnormal noises and feel for excessive heat around the control section.

Review drive event logs daily for any anomalies; clean dust from vents/boards (power off first).

During planned maintenance, verify DC bus voltage accuracy and cable integrity; contact aftermarket suppliers or ABB/Hitachi Energy for persistent issues or spares for the ABB SAFT183VMC.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.