There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

Motorola MVME 5100 01-W3620F 66A Single Board Computer

The Motorola MVME 5100 system platform, specifically identified by build configuration 01-W3620F 66A, is an industry-standard 6U single-slot processor card optimized for real-time operating systems such as VxWorks and LynxOS. At the heart of this specific variant is an embedded PowerPC MPC7410 microprocessor, which integrates an AltiVec vector processing unit to handle heavy floating-point mathematics and algorithmic processing workloads efficiently.

The 01-W3620F 66A variant is equipped with high-density onboard SDRAM with ECC (Error-Correcting Code) to prevent computational failures in high-availability environments. Memory routing and system logic are managed via the high-bandwidth Hawk ASIC controller, providing a direct, fast pipeline between the CPU, local memory, and the VME backplane. Additionally, the card features integrated dual 10/100Base-TX Ethernet ports, dual serial ports, and support for dual IEEE 1386.1 PCI Mezzanine Cards (PMCs), allowing for easy addition of specialized fieldbus or network interfaces.

• Military and Aerospace C4ISR: Deployed in rugged environments for radar signal processing, sonar arrays, and flight simulation computation.

• Advanced Industrial Control: Serving as the primary host controller in high-speed manufacturing lines, paper mills, and automotive assembly synchronization.

• Medical Diagnostic Imaging: Providing the raw computing power necessary for real-time calculation in MRI, CT scan reconstruction, and X-ray processing systems.

• Power Plant Automation: Managing supervisory algorithms and interlocking controls within distributed energy systems.

• AltiVec Technology Vector Engine: The integrated MPC7410 processor accelerates complex math operations, making it highly effective for algorithmic processing and DSP-like workloads.

• ECC Memory Protection: Onboard Error-Correcting Code memory continuously detects and corrects single-bit errors, preventing unexpected system halts in critical missions.

• VME64 Interface Backwards Compatibility: Fully supports modern VME64 block transfers while maintaining safe compatibility with older, standard legacy VME slots.

• Dual PMC Expansion Versatility: Two onboard PCI Mezzanine Card slots provide a direct upgrade path for adding specialized analog, digital, or secondary communications hardware.

• Thermal Management Design: Built with physical heatsinks and a structural layout engineered to withstand harsh, high-vibration, and broad temperature industrial enclosures.

• Microprocessor: PowerPC MPC7410 with AltiVec technology clocking at 400MHz / 500MHz (variant specific).

• L2 Cache: 2 MB of high-speed inline backup cache memory.

• System RAM: 512 MB ECC SDRAM onboard.

• Flash Memory: 32 MB Flash memory organized in local sectors for boot firmware (BootBlock/VxWorks bootloader).

• Form Factor: Standard 6U single-slot VMEbus architecture.

• Network Connectivity: 2x RJ-45 10/100Base-TX Fast Ethernet interfaces.

• Serial Interfaces: 2x asynchronous serial ports (routed via RJ-45 or standard micro-miniature ports depending on front plate setup).

• Bus Bridge Controller: Hawk ASIC system memory controller supporting up to 100 MHz source bus speeds.

• PCI Expansion Expansion: Dual 32/64-bit PMC slots running at 33/66 MHz.

• Power Constraints: Requires +5V system power, drawing roughly 4.2 to 5.0 Amps under standard application profiles.

Q1: What does the specific "01-W3620F 66A" designation indicate? 

A: This string identifies the specific hardware bill of materials (BOM) code established by Motorola (later Artesyn). It denotes the exact processor speed, memory size (512MB RAM configuration), flash layout, and whether the board utilizes standard or extended operating temperature components.

Q2: Which real-time operating systems (RTOS) natively support the MVME 5100? 

A: The MVME 5100 series is widely supported by industry-standard RTOS systems, most notably Wind River's VxWorks, Green Hills INTEGRITY, and legacy editions of LynxOS or embedded Linux distributions compiled for PowerPC structures.

Q3: How do I route the I/O pins if I use the PMC slots on this board?

A: Front panel I/O is accessed directly through the faceplates of the installed PMC modules. If you require rear-panel I/O routing, it can be patched through the VME P2 connector using a compatible rear transition module (RTM) designed for the MVME 5100 family.

Q4: Can this model replace an older MVME 2400 or MVME 2700 board? 

A: In most cases, yes. The MVME 5100 is a common upgrade choice for older PowerPC VME modules. However, you will need to recompile or update your application software to target the MPC7410 architecture and verify your P2 backplane pinouts to ensure seamless backward compatibility.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.