TOP
Online Message
ABB NTCL01 INFI90 / Symphony INFI-Net Communication Termination Terminal Board

Designed for large industrial DCS control network construction, NTCL01 adopts passive circuit structure without operation processor, core function is impedance matching termination of INFI-Net high-speed communication loop, solve network data dropout, intermittent offline, communication jitter caused by unmatched cable impedance. Onboard configurable jumpers switch cable mode for twinaxial or coaxial wire, flexible adapt different field network wiring scheme; every communication circuit equipped independent fuse and surge absorption component, effectively restrain field lightning surge and electromagnetic interference damage to core INNIS01/INLIM03 module. Standard backplane plug-in design with dedicated red locking connector, screw fixed terminal for tidy field cable arrangement, PCB three-proof conformal coating anti-dust/moist/corrosion in harsh workshop environment.

Description
Case Introduction:

There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.


ABB NTCL01 INFI90 / Symphony INFI-Net Communication Termination Terminal Board

As essential network matching spare of ABB INFI90/Symphony DCS control system, NTCL01 fixes typical network faults: whole DCS station offline, INFI-Net loop frequent breakdown, remote control communication lost, data transmission error induced by original board aging, terminal oxidation and impedance drift. Fully consistent OEM PCB layout, pin definition and installation dimension, no cabinet wiring change or network parameter modification required during field swap replacement, drastically reduce unit outage maintenance period. Two supply options: factory sealed original new with ABB official specification; refurbished version after component screening, jumper calibration, 72h continuous network on-load aging test, both items covered unified 12-month global warranty for power station unit maintenance, chemical plant DCS transformation and urgent breakdown emergency purchase.

NTCL01

Technical Parameters:
ItemSpecification
ModelNTCL01(Upgrade version NTCL01-A interchangeable)
Applicable SystemABB Bailey INFI90 / Symphony Plus / Harmony DCS
Matching Main ModuleINNIS01、INLIM03 INFI-Net network interface card
Supported CableTwinaxial / Coaxial INFI-Net communication cable(jumper select)
Working Power24VDC, Typical current:15.8mA, Max:19.7mA
ProtectionPer-channel independent fuse + built-in surge suppression circuit
InstallationPCU cabinet backplane plug-in mounting
Operating Temp-20℃ ~ +70℃
Storage Temp-40℃ ~ +85℃
Ambient Humidity5%~90%RH non-condensing(≤55℃);5%~40%RH non-condensing(70℃)
Dimension(W×H×D)180×220×25mm
Net Weight≈0.4kg
CertificationCE, CSA Certified

NTCL01

Application Fields:
  • Thermal Power Plant: Boiler & turbine INFI90 DCS cabinet INFI-Net network maintenance spare

  • Hydropower Station: Unit auxiliary control Symphony DCS communication loop replacement

  • Petrochemical Refinery: Process control DCS plant bus reconstruction & fault repair

  • Paper & Pulp Factory: Main production line ABB Bailey DCS network stocking

  • Metallurgy Plant: Smelting furnace interlock control DCS communication cabinet overhaul

Core Features & Advantages:
  • Exclusive INFI-Net Matching: Perfect electrical & mechanical compatibility with INNIS01/INLIM03 network module

  • Adjustable Impedance Termination: Jumper free switch twin/coaxial cable to avoid signal reflection distortion

  • Full Circuit Safety Protection: Independent fuse+surge circuit isolate field fault from core DCS mainboard

  • Industrial Three-proof PCB: Conformal coating adapt high-dust/humid industrial site environment

  • Plug-and-play Replacement: Standard cabinet plug design, direct swap without network parameter reset

  • Stable Long-term Operation: Passive circuit low failure rate, reduce later maintenance cost

  • New & Refurbished Dual Inventory: Meet bulk project procurement and urgent rush repair separately

  • Strict Pre-shipment Test: All refurbished boards pass full network communication aging debugging

FAQ :

Q1: Which modules cooperate with ABB NTCL01?

A: Specially match INNIS01(INFI-Net Slave Interface) and INLIM03(Plant Loop Interface Module), cannot work alone without above two main cards.

Q2: Common faults needing NTCL01 replacement?

A: INFI-Net network frequent disconnect, DCS cabinet random offline, remote station data loss, unstable communication speed caused by terminal board impedance invalidation.

Q3: Difference between NTCL01 and NTCL01-A?

A: NTCL01-A is updated optimized revision, hardware pin and installation fully interchangeable with standard NTCL01.

Q4: Warranty & Delivery arrangement?

A: Global 12-month warranty; DHL/FedEx fast air shipping for power plant urgent maintenance, shockproof foam+export carton package.

Q5: Does NTCL01 need external programming?

A: No, it belongs passive termination unit without program chip, only configure onboard jumper according to cable type during installation。

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.

Related Products
Guangzhou Qiming Automation Technology Co., Ltd
Room 208, Room D487, No.1933-20 Huaguan
Road, Tianhe District, Guangzhou City
WhatsApp
+86 16626708626
Email
3772179818@qq.com
WhatsApp
WeChat