Modular Expandable I/O Layout: Flexible collocation of digital input/output & analog input/output sub-modules, single base unit supports up to 32-channel 24VDC scanning input, customizable mixed DI/DO/AI/AO configuration per field requirement.
Profibus Standard Fieldbus: Native Profibus DP/DPV1 communication interface, baud rate 9.6kbps~12Mbps adjustable, seamless data interaction with AC800F main controller, compatible Advanced Fieldbus100 bus protocol.
Multi-layer Redundancy Design: Optional dual redundant power supply, redundant fieldbus trunk and independent channel redundancy configuration; supports bus media monitoring, automatic fault switching and real-time fault alarm reporting.
Per-channel LED Fault Diagnosis: Independent status indicator for every single I/O channel and bus port, rapid on-site fault pinpoint without extra testing instrument.
Configurable Fail-safe Output: All output channels can be preset to freeze status or fixed safe value upon bus breakdown or module fault, protecting field actuators and production equipment from abnormal action.
Full Galvanic Isolation: Complete isolation between field signal side and internal mainboard circuit, anti-surge & anti-electromagnetic interference for harsh industrial workshop environment.
.jpg)
.jpg)
There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.
As core field remote I/O spare of ABB AC800F DCS system,LIMELITE 2000 mainly resolves common breakdown failures: intermittent field signal loss, bus offline disconnection between field site and DCS cabinet, channel burnout leading no input/output, abnormal output drift caused by original module PCB aging and isolation component damage. Fully consistent with OEM dimension, bus protocol and terminal wiring definition, direct plug-and-play replacement without DCS program modification or field rewiring, greatly shorten production halt maintenance duration. Two supply modes available: original factory new with ABB official datasheet; refurbished version after component screening, full-bus communication test +72h continuous rack aging load inspection, both covered unified 12-month global warranty for factory regular spare inventory and urgent emergency rush order.
.jpg)
| Item | Specification |
|---|---|
| Model | LIMELITE 2000 |
| Applicable System | ABB AC800F Advant DCS Controller Series |
| Communication Protocol | Profibus DP/DPV1, Advanced Fieldbus100 |
| Max Channel Capacity | Max 32-point 24VDC scanning input per base unit, expandable DI/DO/AI/AO |
| Field Power Supply | 24VDC(±15%) DC input, overcurrent & reverse polarity protection |
| Isolation Type | Channel-to-mainboard full galvanic isolation |
| Mounting | Standard NS35 EN50022 DIN rail |
| Protection Grade | IP20 (indoor cabinet installation) |
| Operating Temp | -20℃ ~ +60℃ |
| Storage Temp | -40℃ ~ +85℃ |
| Ambient Humidity | 5%~95%RH non-condensing |
| Dimension(W×H×D) | 112×195×35mm |
| Net Weight | ≈0.38kg |
| Certification | CE, IEC61131, UL listed |
| Typical MTBF | >950,000 working hours |
.jpg)
Thermal Power Plant: Boiler auxiliary, water supply & ash handling AC800F DCS field signal collection spare
Petrochemical Refinery: Reaction tank, pipeline valve, on-site transmitter remote signal acquisition
Metallurgy Industry: Furnace temperature detection, cooling system interlock control field IO
Water Treatment Plant: Sewage pump, dosing system PLC/DCS remote I/O transformation
Chemical & Cement Industry: Raw material process line field distributed control cabinet spare inventory
Distributed Field Layout: Decentralized installation near field equipment, save control cabinet wiring cost & reduce signal cable loss
Stepwise Scalable Structure: Add sub-modules gradually following project expansion, optimize procurement cost
Multi-grade Redundancy Option: Power/bus/channel three-layer redundant scheme for high-reliability critical control loops
Fail-safe Custom Output: Predefined safe output state to avoid field equipment malfunction during system fault
Visual LED Diagnostics: One-click quick fault location, reduce field maintenance time cost
New & Refurbished Dual Stock: Separate inventory for bulk project tender and sudden site breakdown rush repair
Full Pre-shipment QC: All goods pass full-channel signal test & long-time rack aging inspection before shipment
Do you provide global shipping services?
Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.
2. What payment methods and currencies do you accept?
To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.
How many parts do you currently have in stock?
We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.
Who can I contact if I encounter any problems?
Our experienced customer service team will handle any issues after you place your order.