Home -Product - ABB

ABB FI830F 3BDH000032R1 PROFIBUS-DP V1 Master Fieldbus Module

FI830F adopts compact single-slot Eurocard rack structure for AC800F backplane installation, conformal coated PCB for anti-dust, anti-moisture & anti-corrosion in harsh industrial cabinet environment:

Standard PROFIBUS-DP V1 Master Function: Fully compliant with DIN19245 protocol standard, adjustable baud rate from 9.6kbps up to max 12Mbps, supports cyclic process data & acyclic parameter diagnostic data transmission.
Large-capacity Slave Access: Single bus segment supports maximum 126 Profibus-DP slave nodes, applicable for large-scale centralized process control networking.
Galvanic Isolated RS485 Interface: DB9 standard Profibus port with built-in optocoupler isolation, effectively filter field surge interference to avoid communication breakdown caused by grid fluctuation.
256KB Onboard Shared Memory: Independent onboard 256KB shared cache, reduces main CPU memory occupation, guarantees high-speed real-time data exchange between rack backplane and field bus.
Redundant Master Working Mode: Supports dual FI830F redundant master collocation paired with redundant AC800F CPU, automatic bus switching once one module fails to avoid whole control network offline.
Hot-Swap & Rapid Commissioning: Supports online hot plug without cutting off cabinet power; full parameter configuration finished via ABB Control Builder F software without extra external configuration tool.
Multi-level Electrical Protection: Built-in overvoltage, overcurrent and short-circuit protection circuit on bus terminal, single slave short fault will not damage master module or internal rack bus.

Consult Now

Back to list

Description

Case Introduction:

There are still some products that have not been listed yet. For more information, please contact us. If the product model does not match the displayed picture, the actual model shall prevail. Please consult us for specific product images; We will arrange for the warehouse to take photos for confirmation. We have 76 shared warehouses worldwide, so it may take several hours to accurately respond to your message. We deeply apologize for any inconvenience caused to you. Of course, we will process your inquiry as soon as possible.

ABB FI830F 3BDH000032R1 PROFIBUS-DP V1 Master Fieldbus Module

As indispensable Profibus network core spare of ABB Freelance AC800F DCS distributed control system, FI830F solves common on-site faults: DCS control screen missing field I/O data, intermittent offline of whole DP bus network, drive communication failure leading production interlock stop, partial slave station drop-out caused by module aging damage. Fully consistent with original pin definition, backplane bus definition and rack installation dimension, direct plug-and-play replacement without modifying DCS program or field DP wiring, greatly shorten equipment downtime during factory urgent breakdown maintenance. Two supply options: factory original new with ABB official datasheet; refurbished version after component screening, full DP communication + backplane bus + redundant function aging test, both covered unified 12-month global warranty for regular spare inventory stocking and rush air delivery. FI830F

Technical Parameters：

Item	Specification
Model	FI830F, Order No:3BDH000032R1
Applicable System	ABB AC800F Freelance DCS Controller (PM802F/PM803F CPU)
Communication Protocol	PROFIBUS-DP V1 (DIN19245 Standard)
Bus Interface	1×Isolated RS485 DB9 Profibus Port
Baud Rate Range	9.6kbps ~ 12Mbps Auto-adaptive
Max Connect Slaves	126 DP slave devices per module
Onboard Shared Memory	256KB
Power Supply	24VDC ±10% via rack backplane
Typical Power Consumption	2.4W~2.8W
Isolation Voltage	250VDC dielectric withstand between bus & internal circuit
Mounting	Single slot plug-in for AC800F standard rack
Operating Temp	-25℃ ~ +60℃
Storage Temp	-40℃ ~ +85℃
Ambient Humidity	5%~95%RH non-condensing
Dimension(W×H×D)	28×155×125mm
Net Weight	≈0.19kg
Certification	CE, IEC61131-2 Industrial Automation Standard
MTBF	＞920,000 working hours

FI830F

Application Fields：

Thermal & Hydropower Plant: Boiler, turbine auxiliary AC800F DCS cabinet Profibus network spare
Petrochemical & Refinery: Chemical reactor, distillation tower process control DCS maintenance parts
Cement Industry: Large cement kiln raw mill process automation control system stocking spare
Metallurgy Plant: Blast furnace, continuous casting production line ABB Freelance DCS overhaul spare
Water Treatment Plant: Urban sewage & tap water centralized process control DCS spare parts

Core Features & Advantages：

Standard Profibus DP Master Design: Compatible with all mainstream DP slave brands (ABB, Siemens, Danfoss etc.) for cross-brand device networking
Full Isolation Anti-interference: Optimized for high-electromagnetic interference industrial workshop environment
Redundant Master Optional: Dual-card redundant setup improves whole network running reliability for critical production line
Hot-swap Quick Replacement: Online swap without cabinet power cut, minimize production halt loss
Software One-key Configuration: Parameter setting via Control Builder F, no extra handheld config tool needed
New & Refurbished Dual Inventory: Separated stock for project tender and sudden equipment emergency maintenance
Full Pre-shipment QC: Every finished unit passes full DP bus communication test and continuous rack aging inspection before shipment

FAQ：

Q1: Which controller matches ABB FI830F?

A: Specially designed for ABB AC800F Freelance DCS with PM802F/PM803F CPU, installed on AC800F main rack slot, connects backplane internal bus and field Profibus DP network.

Q2: Common faults requiring FI830F replacement?

A: Entire Profibus bus offline, random drop of multiple field slave stations, DCS no real-time data feedback, frequent DP communication alarm on controller screen.

Q3: Need program modification after module replacement?

A: No, controller automatically identifies module address via backplane, original configuration downloaded by Control Builder F keeps unchanged, direct startup after installation.

Do you provide global shipping services?

Yes. We have local distribution centers on all continents, which can quickly transport parts to any corner of the world.

2. What payment methods and currencies do you accept?

To make your purchasing process as simple as possible, we offer multiple payment methods including bank transfer, check, and PayPal. Meanwhile, we also accept most mainstream credit and debit cards, such as Visa, Mastercard, and American Express. We can accept payments in most major currencies worldwide, but we recommend using US dollars (USD), British pounds (GBP), or euros (EUR) as a priority. Payments in other currencies may incur additional fees. All transactions are securely processed by HSBC Bank and HSBC Merchant Services.

How many parts do you currently have in stock?

We have a vast inventory of thousands of new, refurbished, and outdated automation components, including products from well-known manufacturers such as ABB and Schneider. If you cannot find the required parts, please do not worry. We work closely with a global network of professional suppliers to provide you with tailored quotes even if the part is not listed on our website.

Who can I contact if I encounter any problems?

Our experienced customer service team will handle any issues after you place your order.

Previous article Next article